problem | possible cause | solution |
unable to oprate | Insuifficient compressor output Flushing holes in bit blocked Contamination in hammer Worn or broken parts in hammer Improper lubrication of hammer | Adjust air pressure properly Clean holes Dismantle and clean hammer Inspect and replace hammer parts as necessary Check correct type of lubricating oil and use proper amount formhe operation of hammer |
low penetration | Insufficient compressor output Broken 0 rings Excessive worn of button tips Contamination in hammer Worn or broken parts in hammer Improper lubrication of hammer | Adjust air pressure properly Replace 0 rings Replace button tips Olsmantle and clean hammer Inspect and replace hammer parts as necessary Check correct type of lubricating oil and use proper amount |
insufficient sludge output | Insufficient compressor output Improper or worn check valve/ foot valve Flushing holes in bit blocked Contamination in hammer Wear sleeve worn beyond the limit | Adjust air pressure and volume properly Check and use proper valve Clean holes Dismantle and clean hammer Replace wear sleeve |
erratic opration | Flushing holes in bit blocked Worn or broken parts in hammer Bit breakage Improper lubrication of hammer | Clean holes Inspect and replace hammer parts as necessary Replace bit Check correct type of lubricating oil and use proper amount |